Aluminium & SS Sheet Cladding for Pipe and Equipment Insulation
Neat, weatherproof metal cladding over hot and cold insulation: aluminium sheet for general plant work and stainless steel for pharmaceutical and food plants.
Trusted by
Adani Wilmar
Gopal Glass Works
Gobind Glass & Industries
N K Proteins
Realcade Lifescience
Moly Metal- & many more plants across Gujarat
Why insulation needs cladding
Insulation only works while it stays dry and in place. Cladding is the metal jacket that keeps out rain, wash-down water, dust and sunlight, and protects the insulation from knocks and foot traffic.
Cladding also decides how the job looks. Straight seams, smooth bends and well-made valve covers are the sign of careful work.
Aluminium or stainless steel?
| Aluminium sheet | SS sheet | |
|---|---|---|
| Best for | General plant pipelines, tanks and ducts | Pharmaceutical, food and corrosive areas |
| Finish | Plain or stucco-embossed | Smooth, hygienic and easy to clean |
| Weight and cost | Light and economical | Heavier, with a higher cost |
| Corrosion resistance | Good for most outdoor work | Excellent, also against chemicals and wash-down |
How we make and fit cladding
- Measure the insulated size, then cut and roll the sheet to match.
- Form beads on the edges so that joints lock together and stay stiff.
- Make bends from tapered segments, so the cladding follows the elbow smoothly.
- Build covers around valves and flanges, so maintenance stays easy.
- Overlap every joint, and place the overlap so that water runs off and not in.
- Fix with self-tapping screws or rivets, and seal outdoor joints.
Where we use it
- Hot lines and equipment insulated with rockwool
- Cold lines insulated with nitrile rubber or PUF
- Tanks, vessels, columns and ducts
- Valves, flanges and strainers
- Pharmaceutical plants, with SS sheet
FAQ
Common questions
What thickness of aluminium sheet is used for cladding?
Cladding sheet is thin, commonly around 0.5 to 0.9 mm (roughly 26 to 20 SWG). Larger equipment and areas with foot traffic use the thicker sheet.
When should I choose SS cladding?
In pharmaceutical and food plants, where surfaces must be hygienic and washable, and in areas with corrosive chemicals or sea air.
Can old insulation be re-cladded?
If the insulation underneath is dry and sound, the cladding alone can be replaced. If it is wet or crushed, that section should be insulated again first.
Do you supply aluminium sheet only?
Yes. We supply aluminium sheet for cladding as a material, and we also take complete insulation and cladding contracts.
Our work
Insulation projects by Phoenix Insulations
Aluminium & SS cladding Photos from our sites




Get a quote
Send us your insulation requirement
Share line sizes, lengths, temperatures or a BOQ. Fill in the form and it opens WhatsApp with your details ready to send.
- Mr. Kamlesh Panchal
- +91 98250 46241
- Chat on WhatsApp
- kamleshpanchal246@gmail.com
- 59/797, Prakashdip Appt., Opp. Bhavsar Hostel, Nava Vadaj, Ahmedabad, Gujarat, 380013